PCI TIC

Linear IC Tester

　　AMIDA-1000

　　AMIDA-1600

　　AMIDA-1700

　　AMIDA-1800

　　AMIDA-888

Image Sensor Solutions

　　AMIDA-2000 CMT

　　AMIDA-2000 USB

　　AMIDA-2000 PCI

　　AMIDA-2000 Open/Short

PCI Module

　　GPIB

　　TIC

PCI TIC

The TIC is a time interval counter module for PCI computers. It offers 40-bit counters. You can perform a wide variety of counter tasks with the TIC, including event counting, period measurement, pulse width measurement, frequency measurement, etc.

The TIC uses reciprocal counting techniques to achieve high-resolution measurements on lower frequency signals without sacrificing measurement time. Reciprocal counting provides a fixed number of digits of resolution for all frequencies rather than a fixed resolution in Hz for the same gate time.

　Features

	Frequency, Period, Time Interval, Totalize, Ratio, Pulse Width, Rise Time, Fall Time functions and Histogram.
	DC to 50MHz
	User-friendly drivers simplify configuration and measurements

　Specifications

Channels A and B Input Characteristics：

Frequency Range： DC couple ： DC to 50MHz 　AC, 1M ohm ： 30Hz to 50MHz 　AC, 50 ohm： 10kHz to 50MHz

Operating Range： Range_1 +5V to -5V, Range_2 +20V to -20V, Range_3 +50V to -50V

Damage Level： +10V to -10V for Range_1 @ 1M ohm , +40V to -40V for Range_2 @ 1M ohm , +100V to -100V for Range_3 @ 1M ohm . 5Vrms@50 ohm

Coupling： AC or DC, switchable.

Low Pass Filter： -3dB@140kHz (Nom.).

Impedance： 1M ohm (Nom.) or 50 ohm, selectable.

Trigger (Threshold) Level Range：+- 5.00V in 3mV steps

Attenuator： x1, x4, or x10 (NOM), switchable.

Channel Input： SEPARATE or COMMON, switchable

Arm Input：

Impedance： >1K .

Maximum Input Voltage： 0V to 5V.

Signal： TTL compatible (1.4V threshold).

Frequency A or B：

Range： DC to 50MHz.

Gate Time： 100us to 40000 sec.

Time Interval A-B or Time Interval B-A：

Range：1ns to 21990 sec
Delay： 100us to 40000 sec

Totalize and Gated Totalize, A or B：

Control: Count gate can be controlled by program statement, keyboard input, or arm input.
Rate : DC to 50MHz.

Period A or B：

Range： See Frequency for range and gate time

Ratio A/B or B/A：

Gate Time： 100us to 40000 sec.

Range： DC to 50MHz.

Width A Range：

See Time Interval.

Signal Slope：

+ or - slope programmable on Channel A, Channel B, Arm Start, and Arm Stop

Arming：

Available on all modes.

Time Base：

Standard：25MHz.

Temperature： +-50 ppm, 0℃to 50℃

Optional：+-1 ppm, 0℃to 50℃

　Target Applications

Precision Test and Measurement Related